|
|
|
|
| +44 (0)1727 732320 |
| |
about us | | | contact us | | | pricebeat | | | availability | | | manufacturers | | |
|
|
Product information page by Mercury AV Ltd ( UK Pro Audio Sales ). Please click here to enter our webstore to check prices and availability.
If you need further information please
email us or call
the Sales |
|
QSC PLX 1802 Power Amplifier The QSC PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, QSC PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability.The QSC PLX1802 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The QSC PLX1802 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. QSC PLX1802 - POWER OUTPUT STEREO MODE, both channels driven * 8 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 320 W 330 W 4 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 525 W 575 W 2 ohms EIA 1 kHz 1% THD 900 W BRIDGE MONO MODE * 8 ohms 20 Hz-20 kHz 0.1% THD EIA 1 kHz 0.1% THD 1100 W 1200 W 4 ohms 1 kHz 1% THD 1800 W QSC PLX1802 - SPECIFICATION Signal to Noise (20 Hz - 20 kHz) -107 dB Input Sensitivity @ 8 ohms 1.28 Vrms Gain @ 8 ohms 32 dB Output Circuitry AB Distortion (SMPTE-IM) Less than 0.02% Typical Distortion 1/8 rated power, 20 Hz-20 kHz Full rated power, 20 Hz-20 kHz Less than 0.02% Less than 0.02% Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 500 Input Impedance 20k ohms balanced 10k ohms unbalanced Input Clipping 11 Vrms (+21 dBu) Cooling Variable-speed fan, rear-to-front air flow Input Connectors, each channel 3-pin XLR and 1/4" TRS balanced Output Connectors, each channel Neutrik® NL4 Speakon® and Touch-proof binding posts (Both channels available on Ch 1 NL4 connector) Rear Panel Switches Input Configuration: Bridge/Stereo/Parallel Clip Limiters each channel Filters (per channel): Top 100 Hz HPF/Full/Sub 100 Hz LPF & 33 Hz HPF/Full (infrasonic) Front Panel Controls Detented Input Attenuator: 0 to ? dB Power On/Off Front Panel Indicators Clip: Red LED -10: Green LED Signal (-35 dB): Green LED Power: Blue LED Parallel: Amber LED Bridge Mono: Amber LED QSC PLX1802 - PROTECTION Amplifier Protection Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection Stable into reactive or mismatched loads Load Protection On/off muting, DC-fault power supply shutdown Infrasonic -3 dB, 5 Hz DC fault Power supply shutdown Ultrasonic -3 dB, 85 kHz Short Circuit Cutback Thermal Muting at 90 C Over Current Active clip limiting Power supply cutback High Line Standard +15%, survive +25% Low Line -33% QSC PLX1802 - PHYSICAL Weight 21 lbs. (9.5 kg) net 26 lbs. (11.8 kg) shipping Agency Approvals CE, FCC, cUL, UL * CE versions may have up to 12% (0.5 dBw) less power due to special construction to meet EN-61000 AC harmonic limits QSC PLX1802 - CURRENT CONSUMPTION ( Halve 120V figures for use with 240V Mains Supply ) 1/8 Power (pink noise) 8 ohms 4 ohms 2 ohms 5A/120V 8.7A / 120V 13A / 120V 1/3 Power (pink noise) 8 ohms 4 ohms 2 ohms 7.7A/120V 12.3A / 120V 19.7A / 120V Full Power 8 ohms 4 ohms 2 ohms 12.6A/120V 21.3A / 120V 33.2A / 120V Notes Long term, active-limited to 25A/120V |
|
Click here to check price and availability of the QSC PLX 1802 Power Amplifier in our webstore |
| microphones | radio mics | mixers | signal processing | amplifiers |
| speakers | record + playback | earphones + iem | headphones | cables + misc |
|
|
|
|
|
|
|
QSC PLX 1802 Power Amplifier | The information presented on this page includes original content owned by Mercury AV Ltd which is subject to copyright law. You are welcome to link to this page but must not copy any information from the page. We will take legal action against any individual or company that we find doing this. |
