Nexo GEO S1210
Nexo GEO S1210 ThumbnailNexo GEO S1210 Thumbnail
  • Overview
  • Specification

The compact, 2-way GEO S1210 is a scalable line array module that displays exceptional MF-LF output (103dBSPL nominal sensitivity -1W @1m) from a single12 inch LF driver and NEXO’s proprietary Directivity Phase Device (DPD). A very narrow-Q (10°) device in single-source mode, S1210’s unique Hyperboloid Reflective Wavesource (HRW) allows coupled S1210/1230s to radiate as coherent, wavefronts, yeilding precise pattern control in vertical or horizontal arrays. S12 arrays display traditional

Coupled MF/HF pattern control is array-dependent, as designed by NS-1 array software. Non-coupled MF/HF coverage is adjustable, via NEXO’s patented Configurable Directivity Device (CDD) flanges, at either 80° or 120°. Comprehensive hardware accessories, for both fixed and mobile systems, optimize inter-cabinet angles and rigging. NEXO’s NXAMP TDcontroller maximizes S1210’s MF/HF coherency while providing EtherSound network control.

Components HF: 1x 3 inch voice coil, 1.4 inch throat 16 ohm driver on a 5° hyperboloid reflective wavesource.
MF/LF (front-firing): 1x 12 inch (30cm) high excursion neodymium 16 ohm driver.
Height x Width x Depth 344 x 674 x 378 mm (13 1/2 inches x 26 1/2 inches x 14 7/8 inches) excluding accessories.
Rigging axis to axis height: 345mm (13 1/2 inches)
Shape 10° Trapezoid
Weight net 28.05kg (61.8 lbs) including array assembly system.
Connectors 2x NL4MP SPEAKON 4-pole (In & Through)
Construction Baltic Birch ply with structured black coating.
Front finish Molded Dark Grey Metal Grill.
Flying points Two plates connecting with external accessories.Intercabinet angle adjustments = 0.2°, 0.315°, 0.5°, 0.8°; 1.25°, 2.0°, 3.15°, 5°, 6.3°, 8.0°, 10.0° (logarithmic steps)

Frequency response 53Hz - 19kHz ±3dB
Usable range @-6dB 50Hz - 20kHz
Sensitivity 103dB SPL nominal
Peak SPL @ 1m Configuration dependent
Dispersion Coupling Plane: Configuration dependent Non-Coupling Plane: Configurable 80° / 120°
Crossover frequency LF- HF: 1.1kHz Passive or Active (internally configurable)
Nominal impedance 16 ohms
Recommended amplifiers
3 x GEO S1210 in parallel HF: 875 to 1550W into 4 ohms LF: 1750 to 3100W into 4 ohms
4 x GEO S1210 in parallel HF: 1000 to 1800W into 4 ohms LF: 2000 to 3600W into 4 ohms
6 x GEO S1210 in parallel HF: 1650 to 3000W into 2 ohms LF: 3300 to 6000W into 2 ohms

Electronic Controller NEXO TDcontroller presets are precisely matched to GEO S12 Series cabinets and include sophisticated protection. Using GEO S12 Series cabinets with improperly connected TDcontrollers will result in poor sound quality and can damage components.
Array Design Arrays of less than 4x GEO S1210 will provide poor dispersion control and are neither recommended nor supported.
Sub-Bass RS15 / CD18 / GEO SUB / S2 extend system low frequency response down to 35Hz / 32Hz / 38Hz / 32Hz.
Speaker Cables Active: 1-/1+:LF; 2-/2+: HF / Passive: 1-/1+: Not Connected; 2-/2+:LF + HF.
Rigging System Please refer to the GEO S1210 User Manual before operation.

Packaging GEO S1210 are packaged individually
Shipping Weight 1x GEO S1210 = 30kg(66.1lbs), 0.15 cu m (5.3 cu ft)
Clearance SaleBig SavingsAvailable NowFind Out More